# Bathroom Waterproofing Cost Calculator & Price Guide

This is the text version of https://www.supertrades.com.au/calculators/bathroom-waterproofing-cost-calculator.

Bathroom waterproofing cost in Australia usually depends on how much of the wet area needs membrane and whether the substrate is ready to go. For a typical bathroom waterproofing price, supply and install rates in AUD, per m² of floor area, range from $170/m² for a full bathroom up to $260/m² for a shower recess, with a $100/m² adder where the area needs repair before waterproofing can begin.

## Bathroom Waterproofing price breakdown

Typical job based on 3 m². Prices are supply-and-install midpoints. Actual quotes vary.

| Type | Cost per m² | Typical 3 m² job |
| --- | --- | --- |
| Shower recess | $260 | $780 |
| Shower + floor | $200 | $600 |
| Full bathroom | $170 | $510 |

## What affects Bathroom Waterproofing cost

- **Scope of waterproofing area:** The biggest driver of water proofing bathroom cost is how much of the wet area is being treated. A shower recess is priced at $260/m², shower + floor at $200/m², and a full bathroom at $170/m².
- **Condition of the substrate:** Condition changes the price because membrane can only be applied once the surface is ready. Good means substrate ready to membrane (new reno or tiles already off), while needs repair includes tile strip-out, screed repairs or fall correction and adds $100/m².
- **Detailing in shower zones:** Shower areas generally cost more per square metre because they involve higher-detail work at the waste, hob and corners. That is why shower waterproofing cost is highest for a shower recess-only job.
- **Minimum job charge:** Small bathrooms and partial wet areas can look cheap on a per-square-metre basis, but the minimum job charge still applies. If the calculated total falls below $500 AUD, the estimate is lifted to the $500 minimum.

## Frequently asked questions

### How much does bathroom waterproofing cost?

Bathroom waterproofing cost is usually priced by area and scope. Mid rates are $170/m² for a full bathroom, $200/m² for shower + floor, and $260/m² for a shower recess, with a $100/m² adder if the area needs repair before membrane can be applied. Very small jobs are subject to a $500 minimum charge.

### What is the typical bathroom waterproofing price?

A 3 m² shower recess comes to about $780 at the midpoint. A 6 m² bathroom floor with a shower comes to about $1,200, and a 6 m² full bathroom comes to about $1,020. Displayed estimates vary by about ±18% around those midpoints, and very small jobs are lifted to the $500 minimum job charge.

### What does shower waterproofing cost in Australia?

For a shower recess only, the shower waterproofing cost is $260/m² supplied and installed. On a 3 m² example, that gives a midpoint estimate of $780 AUD before any condition adder. If the area needs repair, add $100/m².

### How much is shower base waterproofing or waterproofing shower recess areas?

Shower base waterproofing and waterproofing shower recess areas usually sit in the highest rate category because of the detailed work around the waste, hob and corners. The midpoint rate is $260/m², so a 3 m² shower recess example is $780 AUD, with a further $100/m² added if repairs are needed first.

### What is the cost of waterproofing shower walls and bathroom floor waterproofing together?

Where the job includes the shower recess plus the bathroom floor membrane, the midpoint rate is $200/m². For a typical 3 m² area, that works out to $600 AUD before any repair-related adder. If the substrate is not in good condition, allow an extra $100/m².

### Is there a bathroom sealing cost adder if the area is not in good condition?

Yes. If the area is not in good condition, there is a $100/m² adder. Good means substrate ready to membrane (new reno or tiles already off), while needs repair means tile strip-out, screed repairs or fall correction.

Quotes: [Bathroom Waterproofing](https://www.supertrades.com.au/bathroom-waterproofing/index.md).
