# House Rendering Cost Calculator & Price Guide

This is the text version of https://www.supertrades.com.au/calculators/house-rendering-cost-calculator.

Use this House Rendering Cost Calculator & Price Guide to estimate house rendering cost for exterior house rendering in Australia. Typical home rendering costs start from $45/m² for a cement render house, rise to $60/m² for acrylic, and reach $75/m² for a premium texture or polymer facade render, all in AUD before access, condition and optional extras.

## House Rendering price breakdown

Typical job based on 150 m². Prices are supply-and-install midpoints. Actual quotes vary.

| Type | Cost per m² | Typical 150 m² job |
| --- | --- | --- |
| Cement render | $45 | $6,750 |
| Acrylic render | $60 | $9,000 |
| Texture / polymer coat | $75 | $11,250 |

## What affects House Rendering cost

- **Render type:** The main driver of render cost is the finish you choose. Cement render is $45/m², acrylic render is $60/m², and texture or polymer coat is $75/m², with premium decorative finishes costing more per square metre.
- **Wall condition:** If the walls are not in good condition, add $20/m² before multipliers. Good means sound brick or existing render ready for coating, while needs repair means blown render, soft joints or heavy prep / strip before new render.
- **Access and storeys:** Access affects labour time, setup and safety requirements for rendering outside of house surfaces. Single-storey, easy access uses ×1, double-storey or scaffolding uses ×1.25, and tight access or heritage work uses ×1.4 on both surface and repair costs.
- **Optional extras:** Extras can lift the final house rendering total even when the wall area stays the same. Common add-ons are exterior paint after cement render at $3,500, front facade feature detailing at $1,800, and full-perimeter scaffold hire at $2,800.

## Frequently asked questions

### How much is house rendering cost per m² in Australia?

For a standard single-storey job with easy access, house rendering cost starts at $45/m² for cement render, $60/m² for acrylic render, and $75/m² for a texture or polymer coat. If the wall needs repair, add $20/m² before any access multiplier is applied. The calculator then shows an estimate range of around ±20% around the midpoint.

### What are typical home rendering costs for a 150 m² job?

At the default 150 m² example, cement render is about $6,750, acrylic render is about $9,000, and texture or polymer coat is about $11,250 before extras, assuming single-storey easy access and walls in good condition. If the walls need repair, add $3,000 at this size before any access multiplier. Optional extras such as painting or facade detailing are added on top.

### What does a cement render house usually cost?

A cement render house is priced at $45/m² for supply and install under the base single-storey, easy-access setting. For 150 m², that works out to about $6,750 before repairs or extras. If you want exterior paint after cement render, add $3,500.

### How much does rendering front of house or render front house work cost?

The cost to render front house areas depends on the measured wall area, the render selected, and whether you add feature work. The same base rates apply: $45/m² for cement, $60/m² for acrylic, and $75/m² for texture or polymer, with front facade feature detailing available as a flat $1,800 extra. Very small jobs may still be subject to the $2,500 minimum job charge.

### Is a concrete render house the same price as a facade render in acrylic or texture finish?

Not usually. A concrete render house using a traditional cement-style system sits at the lowest base rate of $45/m², while acrylic facade render is $60/m² and texture or polymer facade render is $75/m². The higher-priced finishes generally reflect the upgraded look and material system rather than a different area calculation.

### What changes the cost of rendering outside of house walls?

The biggest changes come from wall condition, access and optional extras. Needs-repair walls add $20/m², double-storey or scaffolding work uses a ×1.25 multiplier, and tight access or heritage projects use ×1.4. Extras like full-perimeter scaffold hire at $2,800 can also increase the final total.

Quotes: [House Rendering](https://www.supertrades.com.au/house-rendering/index.md).
