# Pool Resurfacing Cost Calculator & Price Guide

This is the text version of https://www.supertrades.com.au/calculators/pool-resurfacing-cost-calculator.

Use this Pool Resurfacing Cost Calculator & Price Guide to estimate your pool resurfacing cost in Australia based on interior area and finish type. Typical swimming pool resurfacing cost starts from around $125/m² for Pebblecrete and can reach $280/m² for a full tile interior, all in AUD, with slab repairs adding to the price to resurface a pool.

## Pool Resurfacing price breakdown

Typical job based on 50 m². Prices are supply-and-install midpoints. Actual quotes vary.

| Type | Cost per m² | Typical 50 m² job |
| --- | --- | --- |
| Marblesheen / cement render | $140 | $7,000 |
| Pebblecrete | $125 | $6,250 |
| Quartz / glass bead | $155 | $7,750 |
| Full tile interior | $280 | $14,000 |
| Fibreglass re-gelcoat | $140 | $7,000 |

## What affects Pool Resurfacing cost

- **Surface finish selected:** The finish you choose is the biggest driver of pool resurfacing cost. Mid-rate supply and install pricing starts at $125/m² for Pebblecrete, $140/m² for Marblesheen or fibreglass re-gelcoat, $155/m² for quartz or glass bead, and $280/m² for a full tile interior.
- **Pool interior area:** This calculator is area-based, so larger pools cost more because the rate is applied per square metre of internal surface area. A typical example uses 50 m², but your actual price to resurface pool depends on measured pool interior area.
- **Condition of the slab or shell:** If the slab needs repair rather than being in good condition, add $40/m² to the selected resurfacing rate before multiplying by area. That means condition can materially change the total swimming pool resurfacing cost even when the finish stays the same.
- **Minimum job charge:** When the area-based maths comes in below the minimum, the estimate is lifted to the $4,000 minimum job charge. This most often affects smaller pools or lower-cost finishes where the calculated total would otherwise be less.

## Frequently asked questions

### What is the average pool resurfacing cost in Australia?

Using the default 50 m² example, pool resurfacing cost ranges from about $6,250 for Pebblecrete at $125/m² up to $14,000 for a full tile interior at $280/m². Marblesheen and fibreglass re-gelcoat both sit at $7,000, while quartz or glass bead comes to $7,750. Estimate ranges are displayed at ±15% around the midpoint, with a $4,000 minimum job charge applying where relevant.

### What is the price to resurface a pool with Pebblecrete?

The price to resurface a pool with Pebblecrete is calculated at $125/m² for supply and install. On a typical 50 m² pool, that works out to a midpoint estimate of $6,250 AUD before applying the displayed ±15% range. If slab repair is needed, add $40/m² before multiplying by the pool area.

### How much is the pool refinishing cost for a full tile interior?

Pool refinishing cost for a full tile interior is based on $280/m². For a 50 m² pool, that gives a midpoint estimate of $14,000 AUD, making it the highest-priced option in this guide. The displayed estimate range is then shown at ±15% around that midpoint.

### What is the fibreglass pool resurfacing cost for a re-gelcoat?

Fibreglass pool resurfacing cost for a re-gelcoat is $140/m². On a typical 50 m² fibreglass shell, that equals $7,000 AUD as the midpoint estimate before the calculator applies its ±15% range. If the shell or slab condition requires repair work, add $40/m² first.

### Is fiberglass pool resurfacing cost the same as fibreglass pool resurfacing cost?

Yes — fiberglass pool resurfacing cost and fibreglass pool resurfacing cost refer to the same service, just with different spelling. In this guide, a fibreglass re-gelcoat is priced at $140/m², or $7,000 AUD for a 50 m² pool before the ±15% estimate range is applied. The $4,000 minimum job charge still applies on small jobs if the calculated total falls below that amount.

### How much does concrete swimming pool resurfacing cost?

Concrete swimming pool resurfacing cost depends on the finish chosen. Rates are $125/m² for Pebblecrete, $140/m² for Marblesheen, $155/m² for quartz or glass bead, and $280/m² for a full tile interior. If the concrete slab needs repair, add $40/m² to the selected rate before multiplying by the pool’s interior area.

Quotes: [Pool Resurfacing](https://www.supertrades.com.au/pool-resurfacing/index.md).