# Starlink Installation Cost Calculator

This is the text version of https://www.supertrades.com.au/calculators/starlink-installation-cost-calculator.

Use this Starlink Installation Cost Calculator & Price Guide to estimate your starlink installation cost, starlink setup cost, and overall cost to install starlink in Australia. These figures are labour and mount midpoints only; they exclude the Starlink hardware kit. Typical professional installs start at about $350 AUD for a wall mount and go up to about $650 AUD for a pole or elevated mount before site-complexity multipliers.

## Starlink Installation price breakdown

Typical job based on 1 dish (Single-storey, clear sky, short cable run). Prices are supply-and-install midpoints. Actual quotes vary.

| Type | Cost per dish (Single-storey, clear sky, short cable run) | Typical 1 dish (Single-storey, clear sky, short cable run) job |
| --- | --- | --- |
| Wall mount | $350 | $350 |
| Roof mount | $450 | $450 |
| Pole / elevated mount | $650 | $650 |

## What affects Starlink Installation cost

- **Mounting method:** The biggest driver of starlink installation price is the mount type you choose. A wall mount is $350 AUD, starlink roof mount installation is $450 AUD, and a pole or elevated mount is $650 AUD for a single-storey site with clear sky and a short cable run. Estimates include typical mount hardware, weatherproofing and a standard cable run, not the Starlink dish or router.
- **Roof height and complexity:** More difficult sites such as tile or steep roofs, 2-storey homes, or jobs with a long cable run use a ×1.3 multiplier. This increases the total because the install takes more labour, access equipment, and care with sealing and cable routing.
- **Access difficulty and site conditions:** Tall pole jobs, difficult access, or remote sites use a ×1.5 multiplier. These conditions raise costs because elevated positions can require extra setup time and more complex mounting work.
- **What is not included:** The Starlink hardware kit (dish, router and included cable) is purchased separately from Starlink and is not part of this estimate. If the calculated labour-and-mount amount is very low, a minimum job charge of $250 AUD applies.

## Frequently asked questions

### What is the typical starlink installation cost in Australia?

For a typical 1-dish professional install at a single-storey property with clear sky and a short cable run, labour-and-mount pricing starts at $350 AUD for a wall mount, $450 AUD for a roof mount, and $650 AUD for a pole or elevated mount. The displayed estimate range is based on ±15% around the midpoint. A minimum job charge of $250 AUD applies if the maths come in lower. These figures exclude the Starlink hardware kit.

### How much is the starlink setup cost for a roof mount?

The base starlink roof mount installation cost is $450 AUD for a single-storey home with clear sky and a short cable run. If the job involves a tile or steep roof, a 2-storey home, or a long cable run, apply the ×1.3 multiplier. Tall pole, difficult access, or remote site conditions use a ×1.5 multiplier instead.

### What affects the cost to install starlink on a two-storey home?

A 2-storey home falls into the ×1.3 pricing category, the same as tile or steep roofs and long cable runs. That multiplier applies to the base mount price of $350 AUD for wall mount, $450 AUD for roof mount, or $650 AUD for pole or elevated mount.

### How much does starlink roof mount installation cost compared with a wall mount?

At the standard single-storey, clear-sky, short-run rate, a wall mount is $350 AUD and a roof mount is $450 AUD. That means roof mounting costs about $100 AUD more at the base rate. Both can increase if the site needs the ×1.3 or ×1.5 multiplier.

### Is installing starlink on roof more expensive than a pole mount?

No. At the base rate, installing Starlink on a roof costs $450 AUD, while a pole or elevated mount costs $650 AUD. Pole mounts are usually priced higher because they are used to clear trees or other sky obstructions. As with other options, multipliers of ×1.3 or ×1.5 may apply depending on the site.

### Does the starlink installation price include the Starlink kit?

No. This calculator estimates professional installation only: labour, mount hardware, weatherproofing and a typical cable run. Buy the Starlink dish and router separately from Starlink. If the calculated install amount is below $250 AUD, the minimum job charge is $250 AUD.

Quotes: [Starlink Installation](https://www.supertrades.com.au/starlink-installation/index.md).