Colorbond Fence Cost Calculator & Price Guide
Use this Colorbond Fence Cost Calculator & Price Guide to estimate the cost of Colorbond fence installed for your property and compare typical Colorbond fencing cost options across Australia. Based on standard rates, the colorbond fence cost per meter ranges from $105 AUD for standard panels up to $250 AUD for slat or architectural fencing, before any height multiplier is applied.
Estimate Colorbond fence installation cost
Rough guide based on Australian averages. Real quotes vary by site, finish and contractor.
Leave at 0 if you don’t need any.
- Colorbond standard panels (1.8 m):
- $4,200
Estimates are indicative only. For an accurate price, get free quotes from local tradies above.
Colorbond Fence Price Breakdown
Typical job based on 40 lm. Prices are supply-and-install midpoints — actual quotes will vary.
| Type | Cost per lm | Typical 40 lm job |
|---|---|---|
| Colorbond standard panels | $105 | $4,200 |
| Colorbond with lattice topper | $135 | $5,400 |
| Slat / architectural | $250 | $10,000 |
What Affects Colorbond Fence Cost?
- Fence style: The biggest driver of price is the panel type you choose. Standard Colorbond panels are $105/lm, Colorbond with a lattice topper is $135/lm, and slat or architectural fencing is $250/lm.
- Fence height: Height changes the installed rate by applying a multiplier to the lineal metre cost. A 1.5 m fence uses a ×0.85 multiplier, 1.8 m uses ×1, and 2.1 m uses ×1.5.
- Total fence length: Because pricing is calculated per lineal metre, longer fences increase the total project cost directly. Shorter jobs can still be affected by the minimum job charge of $1500 AUD if the calculated total falls below that amount.
- Estimate range: Displayed estimates are shown as a range, using ±15% around the midpoint price. This helps reflect typical variation around the base installed rate while keeping the calculator aligned with standard pricing.
Colorbond Fence Cost - Frequently Asked Questions
The cost of Colorbond fence installed starts at $105 AUD per lineal metre for standard panels at the 1.8 m rate. Colorbond with lattice topper is $135/lm, while slat or architectural fencing is $250/lm. Height then changes that rate using the calculator multipliers: 1.5 m ×0.85, 2.1 m ×1.5.
For a typical 40 lm fence at 1.8 m high, standard Colorbond panels come to a midpoint of $4200 AUD, with a displayed estimate range of $3570 to $4830 AUD. Colorbond with lattice topper comes to $5400 AUD, with a range of $4590 to $6210 AUD. Slat or architectural fencing comes to $10000 AUD, with a range of $8500 to $11500 AUD.
At 1.5 m high, the calculator applies a ×0.85 multiplier to the base lineal rate. That makes standard panels $89.25/lm, lattice topper fencing $114.75/lm, and slat or architectural fencing $212.50/lm. Very small jobs may still be charged the $1500 AUD minimum if the calculated total is lower.
At 2.1 m high, the calculator uses a ×1.5 multiplier on the base rate. That means standard Colorbond is $157.50/lm, Colorbond with lattice topper is $202.50/lm, and slat or architectural fencing is $375/lm. This higher profile noticeably increases the total installed price.
The Colorbond fence price per metre depends mainly on the design selected. Standard panels are $105/lm, lattice topper fencing is $135/lm, and slat or architectural fencing is $250/lm at the 1.8 m rate. The final installed amount is then adjusted up or down using the selected height multiplier.
Yes. Even though the calculator works from a per metre rate, there is a minimum job charge of $1500 AUD when the maths fall below that amount. This means short fence runs may not simply equal the colorbond fence price per meter multiplied by length.