Pool Resurfacing Cost Calculator & Price Guide
Use this Pool Resurfacing Cost Calculator & Price Guide to estimate your pool resurfacing cost in Australia based on interior area and finish type. Typical swimming pool resurfacing cost starts from around $125/m² for Pebblecrete and can reach $280/m² for a full tile interior, all in AUD, with slab repairs adding to the price to resurface a pool.
Estimate pool resurfacing cost
Supply-and-install midpoints for the pool interior finish only. Waterline tiles, coping, emptying, and chemical startup often add to real quotes.
Estimates are indicative only. For an accurate price, get free quotes from local tradies above.
Compare installers on our Pool Resurfacing hub & request quotes when you're ready.
Pool Resurfacing Price Breakdown
Typical job based on 50 m². Prices are supply-and-install midpoints — actual quotes will vary.
| Type | Cost per m² | Typical 50 m² job |
|---|---|---|
| Marblesheen / cement render | $140 | $7,000 |
| Pebblecrete | $125 | $6,250 |
| Quartz / glass bead | $155 | $7,750 |
| Full tile interior | $280 | $14,000 |
| Fibreglass re-gelcoat | $140 | $7,000 |
What Affects Pool Resurfacing Cost?
- Surface finish selected: The finish you choose is the biggest driver of pool resurfacing cost. Mid-rate supply and install pricing starts at $125/m² for Pebblecrete, $140/m² for Marblesheen or fibreglass re-gelcoat, $155/m² for quartz or glass bead, and $280/m² for a full tile interior.
- Pool interior area: This calculator is area-based, so larger pools cost more because the rate is applied per square metre of internal surface area. A typical example uses 50 m², but your actual price to resurface pool depends on measured pool interior area.
- Condition of the slab or shell: If the slab needs repair rather than being in good condition, add $40/m² to the selected resurfacing rate before multiplying by area. That means condition can materially change the total swimming pool resurfacing cost even when the finish stays the same.
- Minimum job charge: When the area-based maths comes in below the minimum, the estimate is lifted to the $4,000 minimum job charge. This most often affects smaller pools or lower-cost finishes where the calculated total would otherwise be less.
Pool Resurfacing Cost - Frequently Asked Questions
Using the default 50 m² example, pool resurfacing cost ranges from about $6,250 for Pebblecrete at $125/m² up to $14,000 for a full tile interior at $280/m². Marblesheen and fibreglass re-gelcoat both sit at $7,000, while quartz or glass bead comes to $7,750. Estimate ranges are displayed at ±15% around the midpoint, with a $4,000 minimum job charge applying where relevant.
The price to resurface a pool with Pebblecrete is calculated at $125/m² for supply and install. On a typical 50 m² pool, that works out to a midpoint estimate of $6,250 AUD before applying the displayed ±15% range. If slab repair is needed, add $40/m² before multiplying by the pool area.
Pool refinishing cost for a full tile interior is based on $280/m². For a 50 m² pool, that gives a midpoint estimate of $14,000 AUD, making it the highest-priced option in this guide. The displayed estimate range is then shown at ±15% around that midpoint.
Fibreglass pool resurfacing cost for a re-gelcoat is $140/m². On a typical 50 m² fibreglass shell, that equals $7,000 AUD as the midpoint estimate before the calculator applies its ±15% range. If the shell or slab condition requires repair work, add $40/m² first.
Yes — fiberglass pool resurfacing cost and fibreglass pool resurfacing cost refer to the same service, just with different spelling. In this guide, a fibreglass re-gelcoat is priced at $140/m², or $7,000 AUD for a 50 m² pool before the ±15% estimate range is applied. The $4,000 minimum job charge still applies on small jobs if the calculated total falls below that amount.
Concrete swimming pool resurfacing cost depends on the finish chosen. Rates are $125/m² for Pebblecrete, $140/m² for Marblesheen, $155/m² for quartz or glass bead, and $280/m² for a full tile interior. If the concrete slab needs repair, add $40/m² to the selected rate before multiplying by the pool’s interior area.
Ready for real quotes?
We match you with vetted pool resurfacing installers in your area.
Go to Pool Resurfacing hub →