Supertrades

Bathroom Renovation Cost Calculator and Estimator

This bathroom renovation cost calculator is also a bathroom renovation estimator. Enter the length and width, or the floor area in square metres, then choose the shower, vanity, toilet, bath, wall tiling and whether any fittings move. The price adds removal, screed, wall sheeting, waterproofing, adhesive, grout, tiles, tapware, the screen, a fan and lights, plumbing, electrical, painting and a contractor margin. Every line includes GST. A published budget or cosmetic refresh is $8,000 to $15,000. A mid-range full strip-out is $15,000 to $35,000. A luxury renovation is $35,000 to $57,000. The opening example, a 2.4 m by 2.5 m room with a separate shower, a single vanity, a toilet, half-height tiles and the fittings left in place, comes to $15,700 to $25,200 including GST. Both ends sit in the mid-range band. A small bathroom renovation cost follows a smaller floor area.

Estimate bathroom renovation cost

Estimate a full renovation of an existing bathroom, including removal, new waterproofing, tiling and selected fittings.

Room size

Floor area: 6.0 m²

Shower
Vanity
Toilet
Bath
Wall tiling
Move fittings
Adjust materials and extras
Shower screen
Example estimate
$15,700 - $25,200

incl. GST

Removal:
$500 - $1,300
Skip bin:
$300 - $700
Floor screed:
$200 - $400
Wall sheeting:
$800 - $1,600
Waterproofing:
$500 - $800
Adhesive and grout:
$100
Tile supply:
$1,800
Tile installation:
$1,800 - $2,900
Silicone and trims:
$100
Fixtures and tapware:
$2,400
Fan and lights:
$100
Plumbing:
$2,800
Electrical:
$1,700 - $3,900
Painting:
$600 - $1,300
Contractor margin:
$2,000 - $5,000

Total budget

$18,100 - $29,000

Estimates are indicative only. For an accurate price, get free quotes from local tradies above.

Find installers near you →

Compare installers on our Bathroom Renovations hub & request quotes when you're ready.

Bathroom Renovation Price Breakdown

Component rates for a full renovation of an existing bathroom. Every calculator line includes GST. A price that is already GST inclusive is used as published. A trade price that is ex GST, or that does not say, has 10% added. A contractor margin of 15% to 25% is added once to the ex-GST trade and supply subtotal, and that margin is then shown including GST. Dollar amounts in this table are the published figures, rounded to the nearest dollar.

ComponentFromUp to
Tile removal and ordinary prep (m2 of area stripped)$25$65
Skip bin (job)$300$600
Waterproofing to AS 3740 (m2 of membrane)$40$70
Tile installation (m2 installed)$80$130
Tile supply allowance (m2 purchased)$80$80
Bathroom plumbing package (bathroom)$636$636
Shower connection (shower)$455$455
Single vanity connection (vanity)$455$455
Double vanity connection (vanity)$545$545
Toilet connection (toilet)$636$636
Bath connection (bath)$455$455
Floor waste (bathroom)$364$364
First fitting moved (fitting)$1,146$1,146
Each later fitting moved (fitting)$644$644
Electrical (bathroom)$1,500$3,500
Painting and finishing (bathroom)$500$1,200
Toilet suite (suite)$554$554
Vanity cabinet and basin (cabinet)$489$489
Basin mixer (mixer)$320$320
Shower rail (set)$599$599
Semi-frameless shower screen (screen)$299$299
Bath screen (screen)$672$672
Built-in bath (bath)$264$264
Freestanding bath (bath)$889$889
Heated towel rail (rail)$109$109
Underfloor heating (bathroom)$800$2,000
Tile adhesive (20 kg bag)$38$38
Tile grout (1.5 kg bag)$12$12
Floor screed (m2 of floor)$35$60
Shower wall sheeting (m2 of shower wall)$60$120
Other tiled wall sheeting (m2 of tiled wall outside the shower)$45$95
Shower mixer (mixer)$79$79
Bath mixer (mixer)$138$138
Frameless shower screen (screen)$779$779
Bath waste (waste)$33$33
Floor waste grate (grate)$39$39
Exhaust fan (fan)$51$51
Downlight (light)$25$25
Silicone (310 ml cartridge)$18$18
Tile trim (2.4 m length)$26$26

What Affects Bathroom Renovation Cost?

  • Room size and tiling: Floor area changes removal, screed, waterproofing and tiling. Wall tiling changes the sheeting and the tile area. A skip bin, the electrical package and painting stay as job charges, so a larger room does not multiply those.
  • Fittings: A shower, vanity, toilet or bath adds its supply and its plumbing connection. Leaving the fittings in place still includes disconnection and reconnection. Moving a fitting adds a relocation charge on top, once.
  • What a published guide is for: The published bands are a cross-check, not a cap. In Melbourne a full renovation is often $21,000 to $45,000 on the city page. This calculator uses the same Australian rates in every city.

Bathroom Renovation Cost - Frequently Asked Questions

A mid-range full renovation is often $15,000 to $35,000. A budget or cosmetic refresh is $8,000 to $15,000, and a luxury renovation is $35,000 to $57,000. The bathroom renovation estimator opens on a 2.4 m by 2.5 m example at $15,700 to $25,200 including GST. Both ends sit in the mid-range band. The screed and wall lining use per-square-metre rates, and higher whole-bathroom job bands from those guides are not added on top.

Removal, a skip bin, floor screed, wall sheeting, waterproofing, adhesive and grout, tile supply with 10% waste, tile installation, silicone and trims, the fittings and tapware, a fan and lights, plumbing, electrical, painting and a contractor margin. Every line includes GST, and the breakdown adds up to the range. A contingency allowance sits outside that range and starts at 15%.

A smaller floor area reduces removal, waterproofing and tiling. It does not remove the skip, the electrical package, painting, or the plumbing package. Enter the square metres, or a length and width, to see the difference.

The city page for Melbourne says a full renovation is often $21,000 to $45,000. This calculator uses the same national component rates for every city. A suburb or postcode is recorded for the quote and does not change the estimate.

Ready for real quotes?

We match you with vetted bathroom renovations installers in your area.

Go to Bathroom Renovations hub →