Exposed Aggregate Driveway Cost Calculator & Price Guide
Use this guide to estimate exposed aggregate driveway cost in Australia, whether you are comparing a basic new pour or a more decorative finish. Based on current supply-and-install rates, exposed aggregate cost per m2 typically ranges from $95/m² for an overlay to $145/m² for a premium new pour, with the final exposed aggregate driveway price shown in AUD.
Estimate exposed aggregate driveway cost
Supply-and-install midpoints for Australia. New-pour rates include base, formwork and standard aggregate exposure. Overlay rates assume an existing sound slab.
- Finish:
- $8,800
Estimates are indicative only. For an accurate price, get free quotes from local tradies above.
Compare installers on our Exposed Aggregate Driveways hub & request quotes when you're ready.
Exposed Aggregate Driveway Price Breakdown
Typical job based on 80 m². Prices are supply-and-install midpoints — actual quotes will vary.
| Type | Cost per m² | Typical 80 m² job |
|---|---|---|
| New pour — standard aggregate | $110 | $8,800 |
| New pour — premium / coloured blend | $145 | $11,600 |
| Overlay / resurface existing concrete | $95 | $7,600 |
What Affects Exposed Aggregate Driveway Cost?
- Installation type: The biggest pricing difference is whether you need a new pour, a premium decorative new pour, or an overlay over existing concrete. Mid-rate pricing is $110/m² for a standard new pour, $145/m² for a premium or coloured blend, and $95/m² for resurfacing a sound slab.
- Condition of the existing slab: If you are resurfacing and the concrete underneath is in good condition, the overlay rate stays at $95/m². If the slab needs repair, add $25/m² before multiplying by the driveway area.
- Driveway size: This calculator is area-based, so the total cost of exposed aggregate driveway works is mainly driven by square metres. Smaller jobs can be affected by the $4,500 minimum job charge if the calculated total falls below that amount.
- Finish and stone blend: Standard stone blends are priced lower than decorative mixes with coloured aggregate, borders, or contrasting bands. Choosing a premium finish pushes the exposed aggregate concrete driveway cost toward the top end of the range at $145/m².
Exposed Aggregate Driveway Cost - Frequently Asked Questions
For supply and installation, the midpoint rates are $95/m² for an overlay on a sound existing slab, $110/m² for a standard new pour, and $145/m² for a premium or coloured blend new pour. Using the typical 80 m² example, that works out to $7,600, $8,800, or $11,600 before the displayed estimate range is applied. The estimate range shown is generally calculated at ±15% around the midpoint.
A standard new pour is priced at $110/m², while a premium or coloured blend new pour is $145/m². These figures cover supply and installation. If you are comparing finishes, the premium option usually reflects decorative aggregate mixes, borders, or contrasting bands.
At the default 80 m² example size, a standard new pour comes to $8,800 at the midpoint rate of $110/m². A premium new pour is $11,600 at $145/m², while an overlay on a sound slab is $7,600 at $95/m². The displayed estimate range is then shown at roughly 15% below and above those midpoint totals.
If the existing slab is sound, overlay pricing starts from $95/m². When repairs are needed, add $25/m² before multiplying by the area, making the effective resurfacing rate $120/m². For an 80 m² driveway, that changes the midpoint total from $7,600 to $9,600.
The main cost drivers are whether you need a new slab or an overlay, whether you choose a standard or premium aggregate blend, and whether the existing slab needs repair. The rates range from $95/m² to $145/m², with slab repairs adding another $25/m² where required. Job size also matters because a minimum charge of $4,500 AUD applies when the calculated total is lower.
Yes. If the calculated amount based on the per-square-metre rate comes in under $4,500 AUD, the minimum job charge applies instead. This is most relevant for smaller driveways or partial resurfacing jobs.
Ready for real quotes?
We match you with vetted exposed aggregate driveways installers in your area.
Go to Exposed Aggregate Driveways hub →