Supertrades

Gutter Guard Installation Cost Calculator & Price Guide

Planning a gutter guard installation can help reduce leaf build-up and ongoing maintenance, but the gutter guard installation cost depends mainly on the material you choose and the height of the home. In Australia, gutter guard cost installed typically starts from the minimum job charge of $1,400 AUD, with standard rates ranging from $35/lm for brush or foam systems up to $70/lm for stainless steel or ember-rated gutter mesh.

Estimate gutter guard installation cost

Supply-and-install midpoints for Australia. Rates sit inside the usual $35 to $90 per linear metre installed. Aluminium mesh is the common pick. Stainless or ember-rated mesh is for bushfire BAL zones under AS 3959.

Building height
A second storey needs more access time, so expect about 15% more.
Estimated cost range
$2,850 - $3,900
≈ $3,400 midpoint

Estimates are indicative only. For an accurate price, get free quotes from local tradies above.

Find installers near you →

Compare installers on our Gutter Guards hub & request quotes when you're ready.

Gutter Guard Installation Price Breakdown

Typical job based on 75 lm. Prices are supply-and-install midpoints — actual quotes will vary.

TypeCost per lmTypical 75 lm job
Brush or foam$35$2,625
PVC mesh$38$2,850
Aluminium mesh$45$3,375
Stainless or ember-rated mesh$70$5,250

What Affects Gutter Guard Installation Cost?

  • Type of gutter guard material: Material is the biggest driver of gutter guard price. Brush or foam systems are priced at $35/lm, PVC mesh at $38/lm, aluminium gutter guard mesh at $45/lm, and stainless steel gutter guard or ember-rated mesh at $70/lm.
  • Total gutter length: The cost to install gutter guard is calculated per linear metre, so longer rooflines mean a higher total. A larger home needing more gutter mesh installation will cost more than a smaller property.
  • Building height: Single-storey homes are charged at the base rate, while two-storey homes use a 1.15 multiplier. That means the same gutter guard install on a two-storey property costs 15% more than on a single-storey home.
  • Minimum job charge: Even when the per-metre maths come in lower, a minimum charge of $1,400 AUD applies. This often affects smaller jobs where the gutter leaf guard length is relatively short.

Gutter Guard Installation Cost - Frequently Asked Questions

For a typical 75 lm job on a single-storey home, brush or foam gutter guard installation is based on $35/lm, PVC mesh on $38/lm, aluminium mesh on $45/lm, and stainless steel or ember-rated mesh on $70/lm. Using the calculator range of ±15%, that works out to about $2,231 to $3,019 AUD for brush or foam, $2,423 to $3,277 AUD for PVC mesh, $2,869 to $3,881 AUD for aluminium mesh, and $4,463 to $6,038 AUD for stainless or ember-rated mesh.

Two-storey homes use a 1.15 multiplier on the base per-lm rate. For a 75 lm gutter guard install, that means brush or foam is based on $40.25/lm, PVC mesh on $43.70/lm, aluminium mesh on $51.75/lm, and stainless steel gutter guard or ember-rated mesh on $80.50/lm before the displayed ±15% range is applied.

Micro mesh gutter guard usually sits in the premium end when it falls under stainless steel or ember-rated mesh, which is priced at $70/lm. That is higher than brush or foam at $35/lm, PVC mesh at $38/lm, and aluminium gutter guard at $45/lm.

The lowest listed rate is for brush gutter guard or foam gutter guard at $35/lm. However, if the total comes in under the minimum, the gutter guard cost installed will still start from $1,400 AUD.

Gutter mesh installation starts at $38/lm for PVC mesh, rises to $45/lm for aluminium mesh, and reaches $70/lm for stainless steel or ember-rated mesh. By comparison, brush gutter guard and foam gutter guard are $35/lm, so mesh-based leaf guard products can cost slightly more or significantly more depending on the material.

Many homeowners organise gutter cleaning and gutter guard installation at the same time so the system is fitted onto clean gutters. The installation pricing in this guide is based on linear metre rates of $35, $38, $45, or $70 per lm depending on the product, with a minimum job charge of $1,400 AUD.

Ready for real quotes?

We match you with vetted gutter guards installers in your area.

Go to Gutter Guards hub →