House Rendering Cost Calculator & Price Guide
Use this House Rendering Cost Calculator & Price Guide to estimate house rendering cost for exterior house rendering in Australia. Typical home rendering costs start from $45/m² for a cement render house, rise to $60/m² for acrylic, and reach $75/m² for a premium texture or polymer facade render, all in AUD before access, condition and optional extras.
Estimate house rendering cost
Indicative supply-and-apply midpoints for Australia. Rates cover render system and labour on exterior walls. Major structural repairs, full scaffolding on tight sites and interior work are usually extra.
Set to 0 to exclude.
Your real price depends on your site. Local tradies confirm it after a look.
Free and no obligation. Vetted local tradies. Phone optional.
Estimates are indicative only. For an accurate price, get free quotes from local tradies above.
Compare installers on our House Rendering hub & request quotes when you're ready.
House Rendering Price Breakdown
Typical job based on 150 m². Prices are supply-and-install midpoints — actual quotes will vary.
| Type | Cost per m² | Typical 150 m² job |
|---|---|---|
| Cement render | $45 | $6,750 |
| Acrylic render | $60 | $9,000 |
| Texture / polymer coat | $75 | $11,250 |
What Affects House Rendering Cost?
- Render type: The main driver of render cost is the finish you choose. Cement render is $45/m², acrylic render is $60/m², and texture or polymer coat is $75/m², with premium decorative finishes costing more per square metre.
- Wall condition: If the walls are not in good condition, add $20/m² before multipliers. Good means sound brick or existing render ready for coating, while needs repair means blown render, soft joints or heavy prep / strip before new render.
- Access and storeys: Access affects labour time, setup and safety requirements for rendering outside of house surfaces. Single-storey, easy access uses ×1, double-storey or scaffolding uses ×1.25, and tight access or heritage work uses ×1.4 on both surface and repair costs.
- Optional extras: Extras can lift the final house rendering total even when the wall area stays the same. Common add-ons are exterior paint after cement render at $3,500, front facade feature detailing at $1,800, and full-perimeter scaffold hire at $2,800.
House Rendering Cost - Frequently Asked Questions
For a standard single-storey job with easy access, house rendering cost starts at $45/m² for cement render, $60/m² for acrylic render, and $75/m² for a texture or polymer coat. If the wall needs repair, add $20/m² before any access multiplier is applied. The calculator then shows an estimate range of around ±20% around the midpoint.
At the default 150 m² example, cement render is about $6,750, acrylic render is about $9,000, and texture or polymer coat is about $11,250 before extras, assuming single-storey easy access and walls in good condition. If the walls need repair, add $3,000 at this size before any access multiplier. Optional extras such as painting or facade detailing are added on top.
A cement render house is priced at $45/m² for supply and install under the base single-storey, easy-access setting. For 150 m², that works out to about $6,750 before repairs or extras. If you want exterior paint after cement render, add $3,500.
The cost to render front house areas depends on the measured wall area, the render selected, and whether you add feature work. The same base rates apply: $45/m² for cement, $60/m² for acrylic, and $75/m² for texture or polymer, with front facade feature detailing available as a flat $1,800 extra. Very small jobs may still be subject to the $2,500 minimum job charge.
Not usually. A concrete render house using a traditional cement-style system sits at the lowest base rate of $45/m², while acrylic facade render is $60/m² and texture or polymer facade render is $75/m². The higher-priced finishes generally reflect the upgraded look and material system rather than a different area calculation.
The biggest changes come from wall condition, access and optional extras. Needs-repair walls add $20/m², double-storey or scaffolding work uses a ×1.25 multiplier, and tight access or heritage projects use ×1.4. Extras like full-perimeter scaffold hire at $2,800 can also increase the final total.
Ready for real quotes?
We match you with vetted house rendering installers in your area.
Go to House Rendering hub →