Smoke Alarm Installation Cost Calculator & Price Guide
Use this guide to estimate smoke alarm installation cost in Australia, whether you need a basic battery unit or a full compliance upgrade. Typical smoke detector installation cost starts at $120 per alarm for a 10-year battery model and goes up to $280 per alarm for hardwired, interconnected units, with a minimum job charge of $250 AUD.
Estimate smoke alarm installation cost
Supply-and-install midpoints for Australia. Pick alarm type and how many you need. Hardwired and interconnected work usually needs a licensed electrician.
Estimates are indicative only. For an accurate price, get free quotes from local tradies above.
Compare installers on our Smoke Alarm Installation hub & request quotes when you're ready.
Smoke Alarm Installation Price Breakdown
Typical job based on 4 alarm. Prices are supply-and-install midpoints — actual quotes will vary.
| Type | Cost per alarm | Typical 4 alarm job |
|---|---|---|
| 10-year battery smoke alarm | $120 | $480 |
| Hardwired smoke alarm | $200 | $800 |
| Hardwired + interconnected | $280 | $1,120 |
What Affects Smoke Alarm Installation Cost?
- Alarm type: The biggest driver of price is the type of alarm you choose. A 10-year battery smoke alarm is $120 per alarm, a hardwired smoke alarm is $200, and hardwired + interconnected alarms are $280 each.
- Number of alarms: This calculator works on a per-alarm basis, so total cost increases with each unit installed. For smaller jobs, the minimum job charge of $250 AUD applies if the per-alarm total comes in lower.
- Wiring requirements: Hardwired smoke alarm installation cost is higher because mains-powered units need electrician wiring and battery backup. Interconnected systems cost more again because all alarms are linked to sound together.
- Compliance upgrade scope: If you're upgrading for rental, sale or whole-home compliance, you may need more alarms or interconnected units throughout the property. That can push the total toward the hardwired + interconnected rate of $280 per alarm.
Smoke Alarm Installation Cost - Frequently Asked Questions
The smoke alarm installation cost depends on the alarm type and the number of units installed. Pricing starts at $120 per alarm for a 10-year battery smoke alarm, $200 per alarm for a hardwired smoke alarm, and $280 per alarm for hardwired + interconnected alarms. If the total comes in under $250, the minimum job charge is $250 AUD.
For a typical 4 alarm job, a 10-year battery setup is $480, hardwired alarms are $800, and hardwired + interconnected alarms are $1,120. Using the displayed estimate range of plus or minus 15%, that works out to about $408–$552, $680–$920, and $952–$1,288 respectively.
The hard wired smoke alarm installation cost is $200 per alarm. These are mains-powered alarms with battery backup and require electrician wiring, which is why they cost more than sealed 10-year battery units at $120 per alarm.
The interconnected smoke alarm installation cost is $280 per alarm for hardwired units that all sound together. For a 4 alarm installation, the midpoint cost is $1,120, with an estimate range of roughly $952 to $1,288 using the calculator's 15% range.
A single 10-year battery smoke alarm is priced at $120 per alarm, a hardwired smoke alarm is $200, and a hardwired + interconnected alarm is $280. However, because there is a minimum job charge, the cost to install a smoke detector for a one-alarm job will be at least $250 AUD.
Smoke alarm installers cost $200 per alarm for standard hardwired smoke alarms and $280 per alarm for hardwired interconnected alarms. For example, 4 hardwired alarms would be $800, while 4 hardwired interconnected alarms would be $1,120, before applying the displayed estimate range.
Ready for real quotes?
We match you with vetted smoke alarm installation installers in your area.
Go to Smoke Alarm Installation hub →