Starlink Installation Cost Calculator & Price Guide
Use this Starlink Installation Cost Calculator & Price Guide to estimate your starlink installation cost, starlink setup cost, and overall cost to install starlink in Australia. These figures are labour and mount midpoints only; they exclude the Starlink hardware kit. Typical professional installs start at about $350 AUD for a wall mount and go up to about $650 AUD for a pole or elevated mount before site-complexity multipliers.
Estimate Starlink installation cost
Labour and mount midpoints for Australia; excludes the Starlink hardware kit. Pick mount type and site complexity. Real quotes vary by roof, cable run and access.
Estimates are indicative only. For an accurate price, get free quotes from local tradies above.
Compare installers on our Starlink Installation hub & request quotes when you're ready.
Starlink Installation Price Breakdown
Typical job based on 1 dish (Single-storey, clear sky, short cable run). Prices are supply-and-install midpoints — actual quotes will vary.
| Type | Cost per dish (Single-storey, clear sky, short cable run) | Typical 1 dish (Single-storey, clear sky, short cable run) job |
|---|---|---|
| Wall mount | $350 | $350 |
| Roof mount | $450 | $450 |
| Pole / elevated mount | $650 | $650 |
What Affects Starlink Installation Cost?
- Mounting method: The biggest driver of starlink installation price is the mount type you choose. A wall mount is $350 AUD, starlink roof mount installation is $450 AUD, and a pole or elevated mount is $650 AUD for a single-storey site with clear sky and a short cable run. Estimates include typical mount hardware, weatherproofing and a standard cable run, not the Starlink dish or router.
- Roof height and complexity: More difficult sites such as tile or steep roofs, 2-storey homes, or jobs with a long cable run use a ×1.3 multiplier. This increases the total because the install takes more labour, access equipment, and care with sealing and cable routing.
- Access difficulty and site conditions: Tall pole jobs, difficult access, or remote sites use a ×1.5 multiplier. These conditions raise costs because elevated positions can require extra setup time and more complex mounting work.
- What is not included: The Starlink hardware kit (dish, router and included cable) is purchased separately from Starlink and is not part of this estimate. If the calculated labour-and-mount amount is very low, a minimum job charge of $250 AUD applies.
Starlink Installation Cost - Frequently Asked Questions
For a typical 1-dish professional install at a single-storey property with clear sky and a short cable run, labour-and-mount pricing starts at $350 AUD for a wall mount, $450 AUD for a roof mount, and $650 AUD for a pole or elevated mount. The displayed estimate range is based on ±15% around the midpoint. A minimum job charge of $250 AUD applies if the maths come in lower. These figures exclude the Starlink hardware kit.
The base starlink roof mount installation cost is $450 AUD for a single-storey home with clear sky and a short cable run. If the job involves a tile or steep roof, a 2-storey home, or a long cable run, apply the ×1.3 multiplier. Tall pole, difficult access, or remote site conditions use a ×1.5 multiplier instead.
A 2-storey home falls into the ×1.3 pricing category, the same as tile or steep roofs and long cable runs. That multiplier applies to the base mount price of $350 AUD for wall mount, $450 AUD for roof mount, or $650 AUD for pole or elevated mount.
At the standard single-storey, clear-sky, short-run rate, a wall mount is $350 AUD and a roof mount is $450 AUD. That means roof mounting costs about $100 AUD more at the base rate. Both can increase if the site needs the ×1.3 or ×1.5 multiplier.
No. At the base rate, installing Starlink on a roof costs $450 AUD, while a pole or elevated mount costs $650 AUD. Pole mounts are usually priced higher because they are used to clear trees or other sky obstructions. As with other options, multipliers of ×1.3 or ×1.5 may apply depending on the site.
No. This calculator estimates professional installation only: labour, mount hardware, weatherproofing and a typical cable run. Buy the Starlink dish and router separately from Starlink. If the calculated install amount is below $250 AUD, the minimum job charge is $250 AUD.
Ready for real quotes?
We match you with vetted starlink installation installers in your area.
Go to Starlink Installation hub →