Never force a tap or valve that is stiff. Leave the pressure valve near the meter, and the valves on the hot water system, to a plumber.
Low water pressure? Find out where
Low water pressure at home is easy to notice and hard to place. Where the water is weak tells you what is wrong. A weak shower is usually a clogged shower head. One weak tap is usually a blocked filter inside the tap. Weak hot water on its own points at the hot water system. If every tap is weak, the problem is the street supply or a pipe on your own property. Answer a few questions and we will say what is wrong, how soon to act, and who to call. If the water pressure in the house is low, the right fix depends on the place. So how to fix low water pressure in the house starts with finding where it is weak. You can safely clean a shower head, and you can look at the filter in a tap. Anything inside a wall, or near the water meter, is a job for a plumber.
Where is the water weak?
Pick the closest one. Choose the hot option only if more than one hot tap is weak. If a single tap is weak, even a hot one, choose Only one tap.
Most likely
Low water pressure in the shower
Book soon
Rub the holes first. If the shower stays weak, book a plumber. It will not clear on its own.
Only the shower is weak, the other taps are fine, and the shower used to be stronger. That points at the shower head. Hard water leaves a white crust called limescale. It slowly blocks the tiny holes in the shower head. Low water pressure in the shower is far more often this crust than a problem in the pipes. Water pressure low in the shower, with the other taps fine, is nearly always the shower head. Water pressure in the shower is low at every setting once the holes are blocked. Rub the holes with your finger, then run the shower again. If the shower is still weak, a plumber can clear the shower head and the tap behind it. Shower water pressure low on the hot side only, or the cold side only, points at the tap behind the wall instead. A shower that has been gentle since a new shower head went on is a different case. Go back and say the shower has been weak since a new shower head.
Could also be
A hose that kinks behind the wall narrows the flow to the shower head.
A new water saving shower head feels much softer than an old one.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
Repair or replace?
Rub the holes first. A plumber clears the shower head and the tap behind it if the rub does not help.
Most likely
A shower head that was always gentle
Not urgent
The shower is working the way it was made to work.
The shower has been weak since a new shower head went on, and every other tap is fine. Many new shower heads are built to save water. They run more gently than an old one. That is not a fault, and nothing in the pipe is blocked. The shower head is doing what it was made to do. If another tap is weak as well, the shower head is not the whole story. In that case, go back to the first question and say where else the water is weak. A plumber cannot add flow that the shower head was built to hold back.
Try checking this
Run the cold tap in the kitchen. If it is weak too, go back to the first question and say where else the water is weak.
Leave the water saving part inside the shower head. Taking it out will not fix a pressure problem, and it can void the warranty.
Repair or replace?
No repair is needed while every other tap is fine. Keep the shower head you have.
Most likely
Low water pressure in one tap
Book soon
Rinse the filter first. If the tap stays weak, book a plumber. It will not clear on its own.
One tap is weak on both the hot and the cold, and every other tap is fine. Low water pressure in one tap is usually a blocked filter at the tip of the tap. The filter is a small mesh that catches grit, and it unscrews by hand. A kitchen sink with low water pressure has the same problem. So does a basin or a laundry tub. Some people say kitchen faucet instead of kitchen tap. A kitchen faucet with low water pressure is the same problem. Low water pressure from the kitchen tap on one side only, hot or cold, is a different part. That points at the small tap under the sink, which may be partly closed. If the kitchen tap water pressure is low on both sides, go back to the filter. Low water pressure in the kitchen sink is not a sign that the street supply is failing. Rinse the filter, then try the tap again. If only the hot side is weak, go back and say so.
Could also be
A worn tap can narrow the flow on one side. A plumber can check that.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
Repair or replace?
Rinse the filter if the tip of the tap unscrews by hand. A plumber checks the small tap under the sink, and the tap itself, if the filter was clear.
Most likely
One hot tap is weak
Book soon
The other hot taps still run. This one will not fix itself, so book a plumber.
The hot on this tap is weak, and the cold on the same tap is fine. The other hot taps work normally. So the problem is in this tap, not in the hot water system. A plumber would look at the small filter in the tip, the small tap on the hot pipe under the sink, or the tap itself. Do not book a hot water service for this one. The system is working at every other tap.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
Repair or replace?
A plumber looks at this tap. The hot water system is the wrong place to start.
Most likely
Hot water pressure is low
Book soon
Hot water still arrives, but it will not get stronger on its own. Book a plumber.
The hot water is weak at more than one tap, but the cold water is fine. That points at the hot water system, not the pipes in the wall. No hot water pressure at the far tap, while the cold is strong, is the usual sign. Low hot water pressure in the house has the same cause. Hot water pressure is low but cold is fine in the shower too, so the shower head is not the problem. If hot water pressure is low all of a sudden, the cause is still the system. People also say the water heater hot water pressure is low. It means the same thing. Low water pressure with hot water that comes and goes is also the system. Why is my hot water pressure low? A blocked shower head can stop an instant hot water unit from lighting, because the unit needs a steady flow to start.
Could also be
If only one hot tap is weak, the problem is in that tap, not the system.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
If the tap on the cold pipe into the hot water system is only partly open, turn it gently until it stops. If it is stiff, leave it for the plumber.
Most likely
Low water pressure in the area
Book soon
A whole street is affected. Call the number on the bill today if the taps stop.
The neighbours have the same weak water, or the street is being dug up for work. Low water pressure in my area like this is a problem with the supply in the street. The water company looks after that supply. Call the faults number on your water bill, and say which street you are on. Do not pay a plumber to look for a fault in your own pipes until the water company has been out. If the neighbours are fine, the fault is on your property. In that case, go back and say whether it dropped suddenly or faded over time.
Could also be
A hot day can drop the pressure for a whole street. It comes back later.
Try checking this
Ask two neighbours whether their water is weak as well. The answer decides who to call.
Call the faults number on your water bill. It is printed on the bill, and it is answered day and night.
Do not turn the main tap at the meter off and on to test it. A partly closed tap makes the whole house weak.
Repair or replace?
The water company looks at the pipes in the street. A plumber is the next call only if the company says the problem is on your side of the meter.
Most likely
Water pressure suddenly low
Book soon
If the meter numbers move with every tap off, call a plumber today.
The hot and the cold dropped together, and the neighbours are fine. Sudden low water pressure in a house has three common causes. A tap on a pipe was knocked partly shut. A pipe on your property is leaking. Or the pressure valve near the water meter has failed. If the water pressure in the house suddenly dropped after work in the street, ask the water company. Water pressure suddenly low with wet ground outside needs a plumber today. Water pressure suddenly low with dry ground can wait for a normal booking. Why is my water pressure suddenly low? Check the main tap at the water meter, gently. Then watch the meter with every tap off. If the numbers move, a leak is the answer.
Could also be
A neighbour running a hose can drop the pressure for a few hours.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
Repair or replace?
A plumber looks at the pipes and the pressure valve on your property, and finds the leak if the meter keeps moving.
Most likely
Water pressure that faded
Book soon
It is not an emergency, but it will not fix itself either.
The hot and the cold have grown weaker over months, and the neighbours are fine. What causes low water pressure over the years is usually build-up inside old pipes. The pipe slowly gets narrower, so less water gets through. The pressure valve near the water meter can also wear out and stop opening fully. Many houses built since 2005 have that valve. It protects the taps and appliances from street pressure that is too strong. Not every house has one. What causes low water pressure in a house of that age is often the old pipes and the valve together. A plumber tests both. The valve is not a do-it-yourself job, because a small turn can leave the house with no water.
Could also be
A new water saving shower head feels weaker than an old one, even when the pipes are fine.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
Repair or replace?
A plumber tests the pressure valve and the pipes. Leave the valve itself to the plumber.
Most likely
Water from a tank
Book soon
A failing pump can stop altogether, and then the house has no water.
The house is not on the street supply. A tank on the property holds the water, and a pump pushes it to the taps. Low water pressure at home on a tank is a pump problem or an empty tank. It is not a street problem. A plumber looks after both. The water company has nothing to fix here. If the tank is empty, no pump can help, so look at the tank first.
Could also be
A pump with a blocked inlet filter runs but pushes very little water.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
Look at the tank. If the water level is low, the pump has nothing to push.
Repair or replace?
A plumber services the pump. A new pump is a decision for after that, not before.
Most likely
Weak water upstairs
Book soon
A pump that feeds one floor can stop, and then that floor has no water.
The downstairs taps are fine, but the upstairs taps are weak. The pipe or the small pump that feeds the upper floor is the problem. The street supply is not. Low water pressure in a house with two floors often shows up this way, because the water has to be pushed uphill. A plumber looks at the pipe to that floor, and at any pump on it. If the downstairs taps are weak too, go back and say the whole house is weak.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
Repair or replace?
A plumber looks at the pipe and any pump that feeds the upper floor.
Most likely
Why water pressure is low
Book soon
Start with the weakest tap. Call a plumber if two places are weak.
Why is my water pressure so low? Start with where the water is weak, because that is the best clue. One weak shower, with the other taps fine, is a blocked shower head. One weak tap is a blocked filter in that tap. Weak hot water at more than one tap is the hot water system. If every tap is weak, ask the neighbours. If they have the same problem, it is the street supply. If they do not, a pipe on your property is the problem. A house on a tank has a pump to check. Weak water upstairs only is the pipe to that floor. Many people ask why their house water pressure is low. The answer is always one of those places. Water pressure at home is low for a short list of reasons. Low water pressure in houses across Australia comes down to the same list, because pipes work the same way in every state. What causes low water pressure in a house is almost never the water itself. A sudden drop, with the neighbours fine, is a leak or a failed valve on your property. If water pressure is low in a house on a tank, the pump is the first place to look. Low water pressure in a home usually has one cause behind it. How to fix low water pressure depends on that cause, and the other answers say what to do.
Try checking this
Turn off the other taps and the washing machine, then try the weak tap again. Two things running at once make each one weaker. That is not a fault.
Look at the main tap at your water meter and the small taps under the sinks. If one is only partly open, turn it gently until it stops. If it is stiff, leave it alone and tell the plumber.
If the tip of a tap unscrews by hand, rinse the small filter inside it. You can also rub the tiny holes in a shower head with your finger. Do not take a tap apart or undo a hose.
Turn off every tap and appliance, then watch the water meter for a few minutes. If the numbers still move, water is escaping somewhere on your property. A plumber needs to find the leak.
Repair or replace?
A plumber repairs a fault on your property. If only the hot water is weak, the plumber repairs the hot water system. If the neighbours have it too, call the water company.
Renting? Tell your agent or landlord. In a unit, tell the building manager too.